| Contents |
(for selecting, please click on text) |
| |
| 0 |
General |
| |
| 1 |
Technical explanations |
| 1.1 |
Power range |
| 1.2 |
Type code of AEM Motors |
| |
| 1.3 |
Mechanical design |
| 1.3.1 |
Construction |
| 1.3.2 |
Types of construction acc. to DIN EN 60034 / part 7 |
| 1.3.3 |
Degrees of protection acc. to DIN EN 60034 / part 5 |
| 1.3.4 |
Cooling methods acc. to DIN EN 60034 / part 6 |
| 1.3.5 |
Bearings |
| 1.3.6 |
Shaft ends |
| 1.3.7 |
Rotor design |
| 1.3.8 |
Vibration characteristics |
| 1.3.9 |
Noises |
| 1.3.10 |
Ambient conditions |
| 1.3.11 |
Belt drive |
| |
| 1.4 |
Electrical design |
| 1.4.1 |
Voltage and frequency |
| 1.4.2 |
Output and overload capability |
| 1.4.3 |
Speed and speed adjustment |
| 1.4.4 |
Types of duty and switching frequency |
| 1.4.5 |
Insulation |
| 1.4.6 |
Operation in the frequency inverter (FI-mode) |
| |
| 1.5 |
Motor specifications |
| 1.5.1 |
Pole changing motors |
| 1.5.2 |
Medium voltage motors |
| 1.5.3 |
Thermal protection devices |
| 1.5.4 |
Anti-condensation heater |
| 1.5.5 |
Excavator application |
| 1.5.6 |
Special rotors |
| 1.5.7 |
Partial load operation for slip-ring motors |
| 1.5.8 |
Change over to residual voltage |
| 1.5.9 |
Asynchronous generator |
| |
| 2 |
Planning and design guidelines |
| 2.1 |
General project planning and design guidelines |
| 2.2 |
Characteristic counter-torques |
| 2.3 |
Planning and design with respect to starting performance |
| 2.4 |
Drive motors with free-floating belt pulley |
| 2.4.1 |
Calculation of the radial force on the belt pulley |
| 2.4.2 |
Calculation of mass force |
| 2.4.3 |
Calculation of the actual radial force that exists |
| 2.4.4 |
Attachment of belt pulley |
| 2.4.5 |
Direction and size of existing forces |
| 2.5 |
Enquiries / Order data |
| 2.6 |
Dimensions |
| 2.7 |
Symbols and conversions |
| |
| 3 |
Power range and dimensions |
| |
| 3.1 |
Series R (surface ventilated) |
| 3.1.1 |
Three-phase asynchronous motor with
squirrel-cage rotor, shaft height 355 mm |
| 3.1.2 |
Three-phase asynchronous motor with squirrel-cage rotor |
| 3.1.2.1 |
Shaft height 400 mm, series R |
| 3.1.2.2 |
Shaft height 400 mm, series 2R |
| 3.1.3 |
Three-phase asynchronous motor with
squirrel-cage rotor, shaft height 450 mm |
| 3.1.4 |
Three-phase asynchronous motor with
squirrel-cage rotor, shaft height 500 mm |
| 3.1.5 |
Three-phase asynchronous motor with welded stator, shaft height 560 mm |
| 3.1.6 |
Three-phase asynchronous motor with
slip-ring rotor, shaft height 355 mm |
| 3.1.7 |
Three-phase asynchronous motor with
slip-ring rotor, shaft height 400 mm |
| 3.1.8 |
Three-phase asynchronous motor with
slip-ring rotor, shaft height 450 mm |
| 3.1.9 |
Three-phase asynchronous motor with
slip-ring rotor, shaft height 500 mm |
| 3.1.10 |
Three-phase asynchronous motor with
slip-ring rotor - crane duty, shaft height 355 mm |
| 3.1.11 |
Three-phase asynchronous motor with
slip-ring rotor - crane duty, shaft height 400 mm |
| 3.1.12 |
Three-phase asynchronous motor with
slip-ring rotor - crane duty, shaft height 450 mm |
| 3.1.13 |
Three-phase asynchronous motor with
slip-ring rotor - crane duty, shaft height 500 mm |
| |
| 3.2 |
Series A (open-circuit ventilated) |
| 3.2.1 |
Three-phase asynchronous motor with
squirrel-cage rotor, shaft height 315 mm |
| 3.2.2 |
Three-phase asynchronous motor with
squirrel-cage rotor, shaft height 355 mm |
| 3.2.3 |
Three-phase asynchronous motor with
squirrel-cage rotor, shaft height 400 mm |
| 3.2.4 |
Three-phase asynchronous motor with
squirrel-cage rotor, shaft height 450 mm |
| 3.2.5 |
Three-phase asynchronous motor with
squirrel-cage rotor, shaft height 500 mm |
| 3.2.6 |
Three-phase asynchronous motor with
squirrel-cage rotor, shaft height 560 mm |
| 3.2.7 |
Three-phase asynchronous motor with
slip-ring rotor, shaft height 315 mm |
| 3.2.8 |
Three-phase asynchronous motor with
slip-ring rotor, shaft height 355 mm |
| 3.2.9 |
Three-phase asynchronous motor with
slip-ring rotor, shaft height 400 mm |
| 3.2.10 |
Three-phase asynchronous motor with
slip-ring rotor, shaft height 450 mm |
| 3.2.11 |
Three-phase asynchronous motor with
slip-ring rotor, shaft height 500 mm |
| 3.2.12 |
Three-phase asynchronous motor with
slip-ring rotor, shaft height 560 mm |
| |
| 3.3 |
Series U (tube-cooled) |
| 3.3.1 |
Three-phase asynchronous motor with
squirrel-cage rotor, shaft height 630 mm |
| 3.3.2 |
Three-phase asynchronous motor with
squirrel-cage rotor, shaft height 710 mm |
| 3.3.3 |
Three-phase asynchronous motor with
slip-ring rotor, shaft height 630 mm |
| 3.3.4 |
Three-phase asynchronous motor with
slip-ring rotor, shaft height 710 mm |
| |
| 3.4 |
Series W (water-jacketed cooled) |
| 3.4.1 |
Three-phase asynchronous motor with
squirrel-cage rotor, shaft height 315 mm |
| 3.4.2 |
Three-phase asynchronous motor with
squirrel-cage rotor, shaft height 355 mm |
| 3.4.3 |
Three-phase asynchronous motor with
squirrel-cage rotor, shaft height 400 mm |
| 3.4.4 |
Three-phase asynchronous motor with
squirrel-cage rotor, shaft height 450 mm |
| 3.4.5 |
Three-phase asynchronous motor with
squirrel-cage rotor, shaft height 500 mm |
| 3.4.6 |
Three-phase asynchronous motor with
squirrel-cage rotor, shaft height 560 mm |
| |
| 4 |
Delivery and performance programme |
